- Technical parameters :
- Rated temperature:
≤40℃
Rated pressure:
0.7Mpa(0.4-0.95 Mpa allows the use 45Mpa below, accept the order)
The pressure drop points:
＜0.02Mpa
Pressure dew point:
-40℃（0.7Mpa）（-60℃ below, accept the order）
Regenerative way: no hot regeneration
Control mode: full electronic programmable control of time
Regeneration gas consumption of about 13% to 15%, capacity
Adsorbent: activated alumina (DPD - 68 ℃, when the activated alumina add molecular sieve)
Intake oil content:＜0.1mg/m3
Installation: indoor, without foundation, concrete ground make level, environmental temperature
